Spring Lift Kneeler Parts

 

Spring Lift Kneeler Brackets
Lefts and Rights, Sold in Pairs

The correct Spring Lift Brackets needed depends on the size of the kneelers. There are different tensions in springs as well as left and right windings to them. Longer kneelers require heavier tension springs.

Kneeler Size = Springs(part numbers) per side
85” + UP = 146 Left + 125 Right
70” – 84” = 146 Left + 112 Right
50” – 69” = 125 Left + 112 Right
33” – 49" = 112 Left + 112 Right
32” – Less = Only 1 Spring needed 112 Left or Right

using the above information, please provide the size of the kneeler you need brackets for

 
Male Spring Lift Plate
Sold individually
Plate the mounts to pew support
 

Female Spring Lift Shells
Sold individually
SL-Shell-Left(w/Set Cone Pin)
SL-Shell-Right(w/Set Cone Pin)
Shells attach between plates and the kneeler arms
 
 

Spring Lift Springs
Sold individually by part numbers 112L,125L,146L,112R,125R

The correct Spring Lift Brackets needed depends on the size of the kneelers. There are different tensions in springs as well as left and right windings to them. Longer kneelers require heavier tension springs.

Kneeler Size = Springs(part numbers) per side
85” + UP = 146 Left + 125 Right
70” – 84” = 146 Left + 112 Right
50” – 69” = 125 Left + 112 Right
33” – 49" = 112 Left + 112 Right
32” – Less = Only 1 Spring needed 112 Left or Right

 
 

Spring Lift Kneeler Arm #4
#4 Kneeler arms for Spring Lift kneelers
(have special attached threaded hole for black pin)

 

Spring Lift Kneeler Arm #5
#5 Kneeler arms for Spring Lift kneelers
(have special attached threaded hole for black pin)
 
Spring Lift Screw Pin – (now aluminum as pictured)
Connects Spring Lift Bracket to Kneeler Arm
 
Spring Lift Double Threaded Hex Nut
Hex Nut for Spring Lift Kneeler Bracket
 

Spring Lift 1/8” Washer
Washer for Spring Lift Bracket
(Used only in 146L  bracket)
 

Spring Lift 1/16” Washer
Washer for Spring Lift Bracket
(Used in every bracket)
 

Spring Lift Set Cone Pin
1/8” Hex driven Set Cone Pin for setting final spring tensions on Female Shells
 

Type "F-8" Nylon Reducer Bushings
1/8” shoulder gap, 13/16”L, 3/8” ID
Replacement Bushings for Arms
 

Type "R" Rubber Stop
1” Length, 5/8”OD, 1/4” ID
Replacement rubber stop for all current and all older brackets

 

Type "T" Kneeler Mounting Stud
1 3/4” Length, 3/8” thread
Replacement stud for all current and all older loose pin brackets

 

Bracket Screws (available in any quantity)
3/4"     -     1"
1 1/4"  -     1 1/2"
Used on all non floor mount brackets

 

If you would like to order any of our parts, please Call, Email, or Fax us.

Atwood-Hamlin Mfg. Co. Inc.
P.O. Box 578
Richmond, IL 60071
Phone (800)545-8964
Fax (815)678-2130
Info@Atwood-Hamlin.com