Kneeler Brackets & Arms

 

Type "D" Combination Brackets
Measuring 4 ¼” from pin to pin
Sold in Pairs-1 Loose and 1 Solid pin bracket
The Most commonly used bracket. Older versions of this have a point at the top.
All versions of this have the Pat. No. 2892488.
DD brackets are smaller versions and also have the same Pat No.

 

Type "DD" Combination Brackets
Measuring 3” from pin to pin
Sold in Pairs/2 identical Loose pin brackets
Used mostly for Screen/Frontal Kneelers
All versions of this have the Pat. No. 2892488
D brackets are larger versions and also have the same Pat No.

 

Type "DA" Combination Brackets
Measuring 4 ¼” from pin to pin
Sold in Pairs/1 Loose and 1 Solid pin bracket
Identical pivot measurements to our D brackets with the added strength of 2 screw holes
at the top crown to help prevent the brackets from bending at the top.

 


Type "P4" Kneeler Arm #4
3 ½” Pivot from the floor
Lefts and Rights, Sold in Pairs(includes Screws).
Screen/frontal versions of this arm may have the first 1 or 2 holes cut off.
Versions may have Hamlin Mfg. Co. Glendale, Calf. on them.
Older versions of this arm have Pat. No. 180510 as do other arms.

 


Type "P5" Kneeler Arm #5
2" Pivot from the floor
Lefts and Rights, Sold in Pairs(includes Screws).
Screen/frontal versions of this arm may have the first 1 or 2 holes cut off.
Versions may have Hamlin Mfg. Co. Glendale, Calf. on them.
Older versions of this arm have Pat. No. 180510 as do other arms.

           

 

Type "P3" Kneeler Arm #3
4 ½” Pivot from the floor
Lefts and Rights, Sold in Pairs(includes Screws).
Screen/frontal versions of this arm may have the first 1,2, or 3 holes cut off.
Versions may have Hamlin Mfg. Co. Glendale, Calf. on them.
Older versions of this arm have Pat. No. 180510 as do other arms.
Least common version of our arms, only used in special circumstances.

 

Type "G" Extension Brackets
Lefts and Rights, Sold in Pairs
Used to extend the kneeler outwards when Pew supports and ends do not extend
far enough to use a D bracket.

 

Type "A-4" #4 Combination Floor Brackets
Pivot pin is 3 ½” from floor
Lefts and Rights, Sold in Pairs
Floor mounted brackets used when the pew cannot accommodate a kneeler
used with P4 Arm #4

 

Type "A-5" #5 Combination Floor Brackets
Pivot pin is 2" from floor
Lefts and Rights, Sold in Pairs
Floor mounted brackets used when the pew cannot accommodate a kneeler
used with P5 Arm #5

 

Type "E" V-Shaped Screen Bracket
Sold in Pairs/2 identical Loose pin brackets
Used mostly for Screen/Frontal Kneelers
Used to pivot freely where a stop isn't needed

 

Type "ER" V-Shaped Screen Bracket
Sold in Pairs/2 identical brackets
Used mostly for Screen/Frontal Kneelers
Used When a Stop is needed free of a bracket

 

Type "J" Extension Brackets
Lefts and Rights, Sold in Pairs
Used to extend the kneeler outwards when Pew supports and ends do not extend far enough to use a D or G brackets and special applications

 

Type “B” Floor Brackets
Pivot pin is 3 ½” from floor
"BE" are Lefts and Rights, Sold in Pairs
"BC" are Center Brackets(see picture) sold individually
Floor mounted brackets used when the pew cannot accommodate a kneeler
Center brackets are used between 2 kneelers
used with P4 Arm #4

 


Type “C” Floor Brackets
Pivot pin is 2" from floor
"CE" are Lefts and Rights, Sold in Pairs
"CC" are Center Brackets(see picture) sold individually
Floor mounted brackets used when the pew cannot accommodate a kneeler
Center brackets are used between 2 kneelers
used with P5 Arm #5

 

Type "H" 6" Extension Brackets
Sold in Pairs/2 identical Loose pin brackets
Used to extend the kneeler outwards when Pew supports and ends do not extend
far enough, special applications

 

Type "R" Rubber Stop
1” Length, 5/8”OD, 1/4” ID
Replacement rubber stop for all current and all older brackets

 

 

Type "T" Kneeler Mounting Stud
1 3/4” Length, 3/8” thread
Replacement stud for all current and all older loose pin brackets

 

 

Bracket Screws (available in any quantity)
3/4"     -     1"
1 1/4"  -     1 1/2"
Used on all non floor mount brackets

 


If you would like to order any of our parts, please Call, Email, or Fax us.


Atwood-Hamlin Mfg. Co. Inc.
P.O. Box 578
Richmond, IL 60071
Phone (800)545-8964
Fax (815)678-2130
Info@Atwood-Hamlin.com