How to Measure for PewForm Cushions



Comfort Pew Form Cushions Measurement

Please provide the following information when requesting a quotation for Pew Form Cushions. All measurements should be in inches(not feet) to the nearest 1/8".

Length:
To determine the length, using a steel tape measure, measure along the back of the pew seat from inside end to inside end.

If the pew has a center divider, measure each section separately from the pew end to the divider. Record the length to the nearest one eighth inch.

Contour:
Contour is needed if the pew seat is not flat.
Please see our page on Determining the Contour of the Pew Seat.

Please send photographs via email if possible of the following to confirm measurements and any possible problems, odd ends or corners.

Styles:
Deluxe Comfort Pew Form
 1 ½" Foam Padding
 Welted Front Edge
 Non-Skid Base

Economy Pew Form
 1 ½" Foam Padding
 No Welting on Front Edge
 Plain Base

Atwood-Hamlin Mfg. Co. Inc.
P.O. Box 578
Richmond, IL 60071
Phone (800)545-8964
Fax (815)678-2130
Info@Atwood-Hamlin.com