How to Measure for PewBack Cushions


Pew Back Cushions Measurement

Please provide the following information when requesting a quotation for Pew Form Cushions. All measurements should be in inches(not feet) to the nearest 1/8"

 To determine the length, using a steel tape measure, measure along the back of the pew seat from inside end to inside end.

If the pew has a center divider, measure each section separately from the pew end to the divider. Record the length to the nearest one eighth inch.

 Measure from corner of the seat to the start of the top rail. A groove will usually indicate where the top rail starts.

Please send photographs via email if possible of the following to confirm measurements and any possible problems, odd ends or corners.

Pew Back Cushions will be pinned in place or fastened with Velcro.
 ¾" thick high density foam padding mounted to ¼" plywood base is standard for Atwood-Hamlin Pew Back Cushions.

A Welted top edge is optional and highly recommended for a finished look. Pew Back Cushions work best in conjunction with Atwood-Hamlin Drop Front seat cushions.

Atwood-Hamlin Mfg. Co. Inc.
P.O. Box 578
Richmond, IL 60071
Phone (800)545-8964
Fax (815)678-2130